FD60 fire door installation in Sittingbourne

FD60 fire doors in Sittingbourne, done to the evidence

Our FD60 fire doors service covers Sittingbourne and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Fire doors in Sittingbourne protect escape routes in family homes after loft conversions, schools and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Before ordering FD60 doors for a Sittingbourne building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Sittingbourne we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

• Frame fixing and structural gap sealing recorded with photos
• Intumescent and smoke seals as specified
• Certified FD60 doorset or leaf with matching evidence
• Load-rated hinges and correctly powered closer

What the rules say for Sittingbourne

Fire doors in Sittingbourne fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Sittingbourne above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs FD60 fire doors in Sittingbourne?

The need for FD60 fire doors usually arises in mixed-use commercial buildings or refuse stores, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Sittingbourne to keep escape routes protected throughout.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Sittingbourne

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Sittingbourne and nearby

Neighbouring towns such as Faversham, Gillingham, Chatham and Rochester are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions