Steel fire doors in Sittingbourne, done to the evidence
Looking for steel fire doors in Sittingbourne? We supply and fit certified fire doors and components across Sittingbourne and the wider Kent area, working from a free survey and a fixed written quote.
Buildings in and around Sittingbourne range from houses with integral garages to care homes and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We anchor and seal steel frames in Sittingbourne buildings to the manufacturer's instructions and photograph the work before it is covered. Plant rooms, bin stores and warehouses in and around Sittingbourne often call for steel doorsets that can take knocks and damp.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
On a typical job that means:
- Frame anchoring and gap sealing to instructions
- Factory-prepared hinges and hardware
- Ratings to suit the wall, including 60 minutes
- Locks, closers and panic hardware as specified
Which fire door rules apply in Sittingbourne?
The rules that apply to fire doors in Sittingbourne are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Sittingbourne block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Sittingbourne need steel fire doors?
From warehouses to car park lobbies, the requirement for steel fire doors in Sittingbourne comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Sittingbourne
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
What does steel fire doors cost in Sittingbourne?
Budget around £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. Our guide prices are the same in Sittingbourne as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Sittingbourne and nearby
Nearby towns we cover include Faversham, Gillingham and Chatham. Distance from Sittingbourne does not change our guide prices, and the survey and quote are free.
Questions
Is Sittingbourne within your coverage area?
It is. We cover Sittingbourne in Kent and neighbouring towns such as Faversham. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can steel fire doors be painted?
They are usually supplied powder coated. Repainting on site is possible but must avoid covering seals and labels, and should follow the manufacturer's guidance.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.