FD60 fire doors in Sevenoaks

FD60 fire doors in Sevenoaks: what's involved

When you book FD60 fire doors in Sevenoaks, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Buildings in and around Sevenoaks range from care homes to houses with integral garages and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

FD60 openings in Sevenoaks buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Sevenoaks we generally fit certified doorsets, so frame and leaf share the same test evidence.

What do you hand over at the end?

For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.

On a typical job that means:

• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence
• Check of the fire strategy rating for each opening
• Intumescent and smoke seals as specified

The regulations behind fire doors in Sevenoaks

In Sevenoaks, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Sevenoaks building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Who needs FD60 fire doors in Sevenoaks?

Typical settings for FD60 fire doors include refuse stores, plant and boiler rooms and stair cores in taller blocks. In Sevenoaks, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

How a Sevenoaks job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Sevenoaks?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Sevenoaks

Sevenoaks is about 22.8 km from Maidstone, and we cover both, along with nearby Tonbridge and Swanley. Send us your postcode and we'll confirm survey dates.

Common questions