FD60 fire doors in Swanley

FD60 fire doors in Swanley: what's involved

Looking for FD60 fire doors in Swanley? We supply and fit certified fire doors and components across Swanley and the wider Kent area, working from a free survey and a fixed written quote.

Buildings in and around Swanley range from family homes after loft conversions to care homes and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For FD60 work in Swanley we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Swanley buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

As standard, the work covers:

• Intumescent and smoke seals as specified
• Frame fixing and structural gap sealing recorded with photos
• 60-minute glazing systems where vision panels are needed
• Load-rated hinges and correctly powered closer

Rules and responsibilities in Swanley

In Swanley, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Swanley building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Which buildings in Swanley need FD60 fire doors?

From stair cores in taller blocks to plant and boiler rooms, the requirement for FD60 fire doors in Swanley comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

How a Swanley job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Swanley

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Swanley and nearby

Neighbouring towns such as Bexley, Dartford, Welling and Eltham are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions