FD60 fire doors in Dover

FD60 fire doors: our service in Dover

For property owners, landlords and managing agents in Dover, we offer FD60 fire doors with one team for the survey, the product and the installation.

Dover has a broad mix of buildings, including houses with integral garages, light industrial buildings and family homes after loft conversions, and the same fire door principles apply to all of them.

For FD60 work in Dover we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Dover buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

Each installation includes:

• 60-minute glazing systems where vision panels are needed
• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Frame fixing and structural gap sealing recorded with photos

Which fire door rules apply in Dover?

In Dover, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Dover building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Where FD60 fire doors fit in Dover

Typical settings for FD60 fire doors include stair cores in taller blocks, refuse stores and mixed-use commercial buildings. In Dover, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Dover

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Dover

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Dover building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Dover

Nearby towns we cover include Folkestone, Deal and Canterbury. Distance from Dover does not change our guide prices, and the survey and quote are free.

Questions from Dover