FD60 fire doors in Tonbridge

FD60 fire doors in Tonbridge, done to the evidence

We provide FD60 fire doors in Tonbridge (TN9 and the surrounding postcodes), from the first survey through to a documented handover.

In and around Tonbridge, fire door work covers everything from small blocks of flats to schools. We plan each job around the people who use the building.

Before ordering FD60 doors for a Tonbridge building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Tonbridge we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

• Intumescent and smoke seals as specified
• Certified FD60 doorset or leaf with matching evidence
• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos

What the rules say for Tonbridge

In Tonbridge, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Tonbridge building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Where FD60 fire doors fit in Tonbridge

Typical settings for FD60 fire doors include refuse stores, plant and boiler rooms and mixed-use commercial buildings. In Tonbridge, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Tonbridge?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Tonbridge

Tonbridge is about 18.7 km from Maidstone, and we cover both, along with nearby Royal Tunbridge Wells and Sevenoaks. Send us your postcode and we'll confirm survey dates.

Questions