What FD60 fire doors in Gravesend should include
If you need FD60 fire doors in Gravesend, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Gravesend protect escape routes in low-rise blocks of flats, schools and high-street shops alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Gravesend buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Gravesend we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Each installation includes:
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
- Check of the fire strategy rating for each opening
- Frame fixing and structural gap sealing recorded with photos
Fire door law for Gravesend properties
The rules that apply to fire doors in Gravesend are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Gravesend block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD60 fire doors in Gravesend?
The need for FD60 fire doors usually arises in stair cores in taller blocks or refuse stores, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Gravesend to keep escape routes protected throughout.
How a Gravesend job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Gravesend
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Gravesend as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Gravesend
Nearby towns we cover include Grays, Strood and South Ockendon. Distance from Gravesend does not change our guide prices, and the survey and quote are free.
Questions
Do you cover DA11 and nearby postcodes?
Yes. We cover Gravesend including DA11, and nearby towns such as Grays and Strood. The survey and written quote are free.
How quickly can you survey in Gravesend?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.