FD60 fire doors in Faversham, ME13

FD60 fire doors in Faversham: what's involved

Looking for FD60 fire doors in Faversham? We supply and fit certified fire doors and components across Faversham and the wider Kent area, working from a free survey and a fixed written quote.

Buildings in and around Faversham range from small blocks of flats to houses with integral garages and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For FD60 work in Faversham we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Faversham buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence

Which fire door rules apply in Faversham?

The rules that apply to fire doors in Faversham are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Faversham block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD60 fire doors fit in Faversham

Typical settings for FD60 fire doors include refuse stores, plant and boiler rooms and stair cores in taller blocks. In Faversham, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Faversham

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Faversham building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Faversham and neighbouring towns

We also cover towns near Faversham, including Whitstable (10.8 km away), Sittingbourne and Canterbury. If your building is in ME13 or a neighbouring district, the service and pricing are the same.

Common questions