Getting FD60 fire doors right in Grays
From the RM17 postcode district outwards, we take on FD60 fire doors across Grays for homes, blocks and workplaces.
Buildings in and around Grays range from industrial estates to schools and HMOs. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For FD60 work in Grays we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Grays buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What you get:
- 60-minute glazing systems where vision panels are needed
- Intumescent and smoke seals as specified
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
What the rules say for Grays
The rules that apply to fire doors in Grays are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Grays block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD60 fire doors fit in Grays
Landlords, managing agents, facilities teams and homeowners in Grays can all commission FD60 fire doors from us. The usual settings are plant and boiler rooms and mixed-use commercial buildings, though single doors for refuse stores are just as welcome.
The steps on a Grays installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Grays
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Grays building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Grays and neighbouring towns
Nearby towns we cover include South Ockendon, Gravesend and Dartford. Distance from Grays does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover RM17 and nearby postcodes?
Yes. We cover Grays including RM17, and nearby towns such as South Ockendon and Gravesend. The survey and written quote are free.
What happens on a survey in Grays?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.