FD30 fire doors in Faversham

FD30 fire doors for Faversham buildings

Our FD30 fire doors service in Faversham is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Fire doors in Faversham protect escape routes in care homes, family homes after loft conversions and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.

In Faversham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Faversham is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Certified FD30 or FD30S leaf, or full doorset
• Photo record, product data and certificate references at handover
• Overhead closer set to close and latch
• Intumescent strips and smoke seals to the certification

Rules and responsibilities in Faversham

In Faversham, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Faversham building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Faversham

Landlords, managing agents, facilities teams and homeowners in Faversham can all commission FD30 fire doors from us. The usual settings are care homes and blocks of flats, though single doors for shops are just as welcome.

The steps on a Faversham installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Faversham

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Faversham building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Nearby areas we cover from Faversham

Neighbouring towns such as Whitstable, Sittingbourne, Canterbury and Herne Bay are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Faversham