FD30 fire doors in Sutton Coldfield: what's involved
Our FD30 fire doors service in Sutton Coldfield is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Sutton Coldfield, fire door work covers everything from GP surgeries to industrial units. We plan each job around the people who use the building.
For a mixed portfolio in Sutton Coldfield, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Sutton Coldfield is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Certified FD30 or FD30S leaf, or full doorset
- Overhead closer set to close and latch
- Survey of the opening, frame and existing ironmongery
- Intumescent strips and smoke seals to the certification
The regulations behind fire doors in Sutton Coldfield
The rules that apply to fire doors in Sutton Coldfield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Sutton Coldfield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Sutton Coldfield
Landlords, managing agents, facilities teams and homeowners in Sutton Coldfield can all commission FD30 fire doors from us. The usual settings are care homes and blocks of flats, though single doors for schools are just as welcome.
From enquiry to handover in Sutton Coldfield
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Sutton Coldfield?
As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Sutton Coldfield building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Sutton Coldfield and neighbouring towns
Sutton Coldfield is about 11.0 km from Birmingham, and we cover both, along with nearby Washwood Heath and Aldridge. Send us your postcode and we'll confirm survey dates.
Questions
Is Sutton Coldfield within your coverage area?
It is. We cover Sutton Coldfield in West Midlands and neighbouring towns such as Washwood Heath. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.