FD30 fire doors in Coventry

FD30 fire doors in Coventry: what's involved

When you book FD30 fire doors in Coventry, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Coventry has a broad mix of buildings, including mixed-use office buildings, care homes and shared houses, and the same fire door principles apply to all of them.

In Coventry, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Coventry, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

What you get:

• Photo record, product data and certificate references at handover
• Certified FD30 or FD30S leaf, or full doorset
• Survey of the opening, frame and existing ironmongery
• Overhead closer set to close and latch

Rules and responsibilities in Coventry

England's framework applies in Coventry. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Coventry, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Coventry

Typical settings for FD30 fire doors include HMOs, offices and care homes. In Coventry, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Coventry installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Coventry

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Coventry as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Coventry and nearby

We also cover towns near Coventry, including Kenilworth (7.9 km away), Bedworth and Nuneaton. If your building is in CV1 or a neighbouring district, the service and pricing are the same.

Questions from Coventry