FD30 fire doors in Wednesfield, done to the evidence
Looking for FD30 fire doors in Wednesfield? We supply and fit certified fire doors and components across Wednesfield and the wider West Midlands area, working from a free survey and a fixed written quote.
Fire doors in Wednesfield protect escape routes in care homes, schools and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For a mixed portfolio in Wednesfield, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Wednesfield is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
As standard, the work covers:
- Overhead closer set to close and latch
- Certified FD30 or FD30S leaf, or full doorset
- Frame-to-wall gap sealed with an evidenced material
- Fire-tested hinges, latch or lock and intumescent pads
Which fire door rules apply in Wednesfield?
The rules that apply to fire doors in Wednesfield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wednesfield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Wednesfield
From care homes to HMOs, the requirement for FD30 fire doors in Wednesfield comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Wednesfield installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Wednesfield
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Wednesfield
Neighbouring towns such as Willenhall, Wolverhampton, Bloxwich and Wednesbury are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Wednesfield
Do you work in Wednesfield?
Yes, we take on FD30 fire doors in Wednesfield and the surrounding area, including Willenhall and Wolverhampton. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Wednesfield?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

