What FD30 fire doors in Washwood Heath should include
Looking for FD30 fire doors in Washwood Heath? We supply and fit certified fire doors and components across Washwood Heath and the wider West Midlands area, working from a free survey and a fixed written quote.
Fire doors in Washwood Heath protect escape routes in family homes after loft conversions, small offices and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In Washwood Heath, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Washwood Heath, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Photo record, product data and certificate references at handover
- Frame-to-wall gap sealed with an evidenced material
- Survey of the opening, frame and existing ironmongery
- Intumescent strips and smoke seals to the certification
Rules and responsibilities in Washwood Heath
The rules that apply to fire doors in Washwood Heath are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Washwood Heath block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD30 fire doors fit in Washwood Heath
Landlords, managing agents, facilities teams and homeowners in Washwood Heath can all commission FD30 fire doors from us. The usual settings are shops and care homes, though single doors for offices are just as welcome.
The steps on a Washwood Heath installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Washwood Heath?
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Washwood Heath
We also cover towns near Washwood Heath, including Aston (3.8 km away), Birmingham and Acocks Green. If your building is in B8 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Washwood Heath?
Yes, we take on FD30 fire doors in Washwood Heath and the surrounding area, including Aston and Birmingham. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Washwood Heath?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

