What intumescent strips and smoke seals in Sutton Coldfield should include
If you need intumescent strips and smoke seals in Sutton Coldfield, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Sutton Coldfield has a broad mix of buildings, including GP surgeries, HMOs and offices, and the same fire door principles apply to all of them.
Painted and missing seals are among the most common fire door defects nationally; in Sutton Coldfield we replace them with the type and size the certification specifies. We check that each door in your Sutton Coldfield building closes and latches against its new seals before signing it off.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
On a typical job that means:
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
- Removal of damaged or painted seals
- Identification of the specified seals
The regulations behind fire doors in Sutton Coldfield
The rules that apply to fire doors in Sutton Coldfield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Sutton Coldfield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where intumescent strips and smoke seals fit in Sutton Coldfield
Landlords, managing agents, facilities teams and homeowners in Sutton Coldfield can all commission intumescent strips and smoke seals from us. The usual settings are offices and blocks of flats, though single doors for care homes are just as welcome.
From enquiry to handover in Sutton Coldfield
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Sutton Coldfield
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Sutton Coldfield and neighbouring towns
Sutton Coldfield is about 11.0 km from Birmingham, and we cover both, along with nearby Washwood Heath and Aldridge. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Sutton Coldfield?
Yes, we take on intumescent strips and smoke seals in Sutton Coldfield and the surrounding area, including Washwood Heath and Aldridge. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Sutton Coldfield?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.