What FD30 fire doors in Walsall should include
When you book FD30 fire doors in Walsall, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Walsall, converted period houses, care homes and GP surgeries all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Each FD30 leaf we supply for Walsall is sized for the opening, rather than trimmed beyond what its certification allows. In Walsall, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
What you get:
- Photo record, product data and certificate references at handover
- Fire-tested hinges, latch or lock and intumescent pads
- Frame-to-wall gap sealed with an evidenced material
- Overhead closer set to close and latch
The regulations behind fire doors in Walsall
In Walsall, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Walsall building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Walsall need FD30 fire doors?
You are most likely to need FD30 fire doors if you look after blocks of flats, offices or schools. Whatever the building in Walsall, we survey each opening and tell you which doors need work and which do not.
Our process in Walsall
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Walsall
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Walsall as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Walsall and neighbouring towns
Walsall is about 12.9 km from Birmingham, and we cover both, along with nearby Bloxwich and Wednesbury. Send us your postcode and we'll confirm survey dates.
Common questions
Is Walsall within your coverage area?
It is. We cover Walsall in West Midlands and neighbouring towns such as Bloxwich. There is no charge for the survey.
How quickly can you survey in Walsall?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.