FD30 fire door installation in Atherton

FD30 fire doors in Atherton, done to the evidence

Looking for FD30 fire doors in Atherton? We supply and fit certified fire doors and components across Atherton and the wider Greater Manchester area, working from a free survey and a fixed written quote.

In and around Atherton, fire door work covers everything from houses with integral garages to light industrial buildings. We plan each job around the people who use the building.

In Atherton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Atherton, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

• Certified FD30 or FD30S leaf, or full doorset
• Photo record, product data and certificate references at handover
• Overhead closer set to close and latch
• Survey of the opening, frame and existing ironmongery

Fire door law for Atherton properties

The rules that apply to fire doors in Atherton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Atherton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD30 fire doors fit in Atherton

Landlords, managing agents, facilities teams and homeowners in Atherton can all commission FD30 fire doors from us. The usual settings are shops and blocks of flats, though single doors for care homes are just as welcome.

How a Atherton job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Atherton

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Atherton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Atherton and neighbouring towns

Neighbouring towns such as Tyldesley, Westhoughton, Leigh and Hindley are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions