What FD30 fire doors in Prestwich should include
If you need FD30 fire doors in Prestwich, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Prestwich, fire door work covers everything from small offices to light industrial buildings. We plan each job around the people who use the building.
Each FD30 leaf we supply for Prestwich is sized for the opening, rather than trimmed beyond what its certification allows. In Prestwich, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Photo record, product data and certificate references at handover
- Certified FD30 or FD30S leaf, or full doorset
- Frame-to-wall gap sealed with an evidenced material
- Survey of the opening, frame and existing ironmongery
The regulations behind fire doors in Prestwich
England's framework applies in Prestwich. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Prestwich, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Prestwich need FD30 fire doors?
You are most likely to need FD30 fire doors if you look after schools, shops or care homes. Whatever the building in Prestwich, we survey each opening and tell you which doors need work and which do not.
The steps on a Prestwich installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Prestwich
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Prestwich as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Prestwich
We also cover towns near Prestwich, including Whitefield (2.2 km away), Radcliffe and Salford. If your building is in M25 or a neighbouring district, the service and pricing are the same.
Questions
Do you cover M25 and nearby postcodes?
Yes. We cover Prestwich including M25, and nearby towns such as Whitefield and Radcliffe. The survey and written quote are free.
What happens on a survey in Prestwich?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.