FD30 fire doors in Ashton-in-Makerfield, done to the evidence
Looking for FD30 fire doors in Ashton-in-Makerfield? We supply and fit certified fire doors and components across Ashton-in-Makerfield and the wider Greater Manchester area, working from a free survey and a fixed written quote.
Fire doors in Ashton-in-Makerfield protect escape routes in schools, care homes and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Each FD30 leaf we supply for Ashton-in-Makerfield is sized for the opening, rather than trimmed beyond what its certification allows. In Ashton-in-Makerfield, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
Each installation includes:
- Photo record, product data and certificate references at handover
- Certified FD30 or FD30S leaf, or full doorset
- Intumescent strips and smoke seals to the certification
- Overhead closer set to close and latch
Fire door law for Ashton-in-Makerfield properties
England's framework applies in Ashton-in-Makerfield. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Ashton-in-Makerfield, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Ashton-in-Makerfield need FD30 fire doors?
You are most likely to need FD30 fire doors if you look after shops, HMOs or care homes. Whatever the building in Ashton-in-Makerfield, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Ashton-in-Makerfield
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Ashton-in-Makerfield
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Ashton-in-Makerfield building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Ashton-in-Makerfield and nearby
Nearby towns we cover include Golborne, Newton-le-Willows and St Helens. Distance from Ashton-in-Makerfield does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Ashton-in-Makerfield?
Yes, we take on FD30 fire doors in Ashton-in-Makerfield and the surrounding area, including Golborne and Newton-le-Willows. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Ashton-in-Makerfield?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.