What FD30 fire doors in Westhoughton should include
Our FD30 fire doors service covers Westhoughton and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Westhoughton protect escape routes in small blocks of flats, schools and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For a mixed portfolio in Westhoughton, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Westhoughton is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
What you get:
- Certified FD30 or FD30S leaf, or full doorset
- Fire-tested hinges, latch or lock and intumescent pads
- Overhead closer set to close and latch
- Frame-to-wall gap sealed with an evidenced material
Which fire door rules apply in Westhoughton?
England's framework applies in Westhoughton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Westhoughton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD30 fire doors in Westhoughton?
The need for FD30 fire doors usually arises in shops or care homes, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Westhoughton to keep escape routes protected throughout.
Our process in Westhoughton
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Westhoughton?
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Westhoughton
Nearby towns we cover include Atherton, Hindley and Tyldesley. Distance from Westhoughton does not change our guide prices, and the survey and quote are free.
Questions
Is Westhoughton within your coverage area?
It is. We cover Westhoughton in Greater Manchester and neighbouring towns such as Atherton. There is no charge for the survey.
Can you work from an existing inspection report for my Westhoughton building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.