FD30 fire doors in Stalybridge: what's involved
If you need FD30 fire doors in Stalybridge, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Stalybridge, fire door work covers everything from small blocks of flats to schools. We plan each job around the people who use the building.
For a mixed portfolio in Stalybridge, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Stalybridge is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
Each installation includes:
- Overhead closer set to close and latch
- Certified FD30 or FD30S leaf, or full doorset
- Intumescent strips and smoke seals to the certification
- Photo record, product data and certificate references at handover
Which fire door rules apply in Stalybridge?
The rules that apply to fire doors in Stalybridge are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Stalybridge block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Stalybridge
From offices to HMOs, the requirement for FD30 fire doors in Stalybridge comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Stalybridge
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Stalybridge building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Stalybridge and neighbouring towns
Neighbouring towns such as Dukinfield, Ashton-under-Lyne, Hyde and Denton are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Stalybridge within your coverage area?
It is. We cover Stalybridge in Greater Manchester and neighbouring towns such as Dukinfield. There is no charge for the survey.
How quickly can you survey in Stalybridge?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.