FD30 fire doors in Swinton

What FD30 fire doors in Swinton should include

We provide FD30 fire doors in Swinton (M27 and the surrounding postcodes), from the first survey through to a documented handover.

Buildings in and around Swinton range from schools to houses with integral garages and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In Swinton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Swinton is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

As standard, the work covers:

• Overhead closer set to close and latch
• Photo record, product data and certificate references at handover
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

Which fire door rules apply in Swinton?

England's framework applies in Swinton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Swinton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Swinton

You are most likely to need FD30 fire doors if you look after HMOs, schools or offices. Whatever the building in Swinton, we survey each opening and tell you which doors need work and which do not.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Swinton?

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Swinton and nearby

Swinton is about 7.7 km from Manchester, and we cover both, along with nearby Eccles and Walkden. Send us your postcode and we'll confirm survey dates.

Common questions