Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Steel fire doors in Ashton-in-Makerfield, WN4

Robust steel doorsets for plant rooms, stores, bin rooms and back-of-house areas. Covering Ashton-in-Makerfield and WN4, with a free survey and fixed written quote.

Quote in Ashton-in-Makerfield

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Steel fire doors in Ashton-in-Makerfield, done to the evidence

Looking for steel fire doors in Ashton-in-Makerfield? We supply and fit certified fire doors and components across Ashton-in-Makerfield and the wider Greater Manchester area, working from a free survey and a fixed written quote.

Around Ashton-in-Makerfield, light industrial buildings, small blocks of flats and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

We anchor and seal steel frames in Ashton-in-Makerfield buildings to the manufacturer's instructions and photograph the work before it is covered. Plant rooms, bin stores and warehouses in and around Ashton-in-Makerfield often call for steel doorsets that can take knocks and damp.

Where steel fire doors are the better choice

Steel doorsets cope with impact, damp and rough handling better than most timber doors. They are a natural fit for plant and boiler rooms, refuse stores, car park lobbies, workshops and warehouses. Many steel doorsets are available in ratings of 60 minutes and beyond where the test evidence supports it, which suits the higher-rated walls around plant spaces.

As standard, the work covers:

  • Locks, closers and panic hardware as specified
  • Factory-prepared hinges and hardware
  • Ratings to suit the wall, including 60 minutes
  • Frame anchoring and gap sealing to instructions

Which fire door rules apply in Ashton-in-Makerfield?

England's framework applies in Ashton-in-Makerfield. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Ashton-in-Makerfield, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Ashton-in-Makerfield need steel fire doors?

You are most likely to need steel fire doors if you look after car park lobbies, workshops or bin stores. Whatever the building in Ashton-in-Makerfield, we survey each opening and tell you which doors need work and which do not.

How a Ashton-in-Makerfield job runs

  1. Survey the opening, wall type and use
  2. Specify rating, size, hardware and finish
  3. Order factory-prepared steel doorset
  4. Remove existing door and prepare the opening
  5. Anchor, pack and seal the frame; hang the leaf
  6. Commission closer and locks; record evidence

Prices for steel fire doors in Ashton-in-Makerfield

Budget around £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. Our guide prices are the same in Ashton-in-Makerfield as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Ashton-in-Makerfield and neighbouring towns

Ashton-in-Makerfield is about 27.3 km from Manchester, and we cover both, along with nearby Golborne and Newton-le-Willows. Send us your postcode and we'll confirm survey dates.

Questions

Is Ashton-in-Makerfield within your coverage area?

It is. We cover Ashton-in-Makerfield in Greater Manchester and neighbouring towns such as Golborne. There is no charge for the survey.

Can you work from an existing inspection report for my Ashton-in-Makerfield building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

How long do steel doorsets take to make?

Steel doorsets are usually made to order with factory-prepared hardware, so allow a few weeks. We confirm the lead time with your quote.

Do steel fire doors need intumescent seals?

Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.

Talk to us about Ashton-in-Makerfield

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote