FD60 fire doors in London

What FD60 fire doors in London should include

If you need FD60 fire doors in London, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Fire doors in London protect escape routes in purpose-built blocks of flats, hotels and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.

FD60 openings in London buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a London building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

As standard, the work covers:

• Intumescent and smoke seals as specified
• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in London

In London, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. Enforcement of fire safety law in London sits with the London Fire Brigade.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your London building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Which buildings in London need FD60 fire doors?

You are most likely to need FD60 fire doors if you look after stair cores in taller blocks, mixed-use commercial buildings or refuse stores. Whatever the building in London, we survey each opening and tell you which doors need work and which do not.

How a London job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in London

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in London as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around London

Beyond London itself we also cover nearby towns such as City of Westminster (1.4 km), Pimlico and Islington. The service, pricing and evidence are the same wherever you are.

Questions from London