Getting FD60 fire doors right in Cricklewood
We provide FD60 fire doors in Cricklewood (NW2 and the surrounding postcodes), from the first survey through to a documented handover.
Around Cricklewood, hotels, student accommodation and restaurants all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For FD60 work in Cricklewood we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Cricklewood buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
What you get:
- Certified FD60 doorset or leaf with matching evidence
- Load-rated hinges and correctly powered closer
- Check of the fire strategy rating for each opening
- Intumescent and smoke seals as specified
Which fire door rules apply in Cricklewood?
England's framework applies in Cricklewood. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.
For blocks over 11 metres in Cricklewood, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD60 fire doors in Cricklewood?
The need for FD60 fire doors usually arises in mixed-use commercial buildings or stair cores in taller blocks, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Cricklewood to keep escape routes protected throughout.
Our process in Cricklewood
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Cricklewood
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Cricklewood and nearby
We also cover towns near Cricklewood, including Kilburn (1.7 km away), Willesden and Chalk Farm. If your building is in NW2 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Cricklewood?
Yes, we take on FD60 fire doors in Cricklewood and the surrounding area, including Kilburn and Willesden. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Cricklewood?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

