Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD60 fire doors in Camden Town, NW1

Surveyed, supplied and fitted in Camden Town. Heavier 60-minute doors for stair cores, plant rooms and higher-risk compartment lines.

Quote in Camden Town

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

What FD60 fire doors in Camden Town should include

Our FD60 fire doors service covers Camden Town and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Fire doors in Camden Town protect escape routes in care homes, hotels and restaurants alike. We adapt the programme to the building and its occupants, never the standard of the installation.

For FD60 work in Camden Town we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Camden Town buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

  • Certified FD60 doorset or leaf with matching evidence
  • 60-minute glazing systems where vision panels are needed
  • Load-rated hinges and correctly powered closer
  • Frame fixing and structural gap sealing recorded with photos

Which fire door rules apply in Camden Town?

The rules that apply to fire doors in Camden Town are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a Camden Town block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD60 fire doors fit in Camden Town

The need for FD60 fire doors usually arises in plant and boiler rooms or mixed-use commercial buildings, and sometimes stair cores in taller blocks. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Camden Town to keep escape routes protected throughout.

What happens after you enquire

  1. Confirm the 60-minute requirement against the fire strategy
  2. Survey structure, opening size and wall type
  3. Order the certified doorset with ironmongery to its evidence
  4. Install the frame, fix and seal it to the structure
  5. Hang, adjust and test the leaf, closer and latching
  6. Record evidence and make good

Prices for FD60 fire doors in Camden Town

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Camden Town as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Camden Town and nearby

Nearby towns we cover include Chalk Farm, Holloway and Islington. Distance from Camden Town does not change our guide prices, and the survey and quote are free.

Common questions

Is Camden Town within your coverage area?

It is. We cover Camden Town in Greater London and neighbouring towns such as Chalk Farm. There is no charge for the survey.

Do I need to be there for the survey?

Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.

Is FD60 just a thicker FD30?

No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.

Can I upgrade an FD30 door to FD60?

Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

Book a free survey in Camden Town

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote