FD60 fire doors in City of Westminster

FD60 fire doors for City of Westminster buildings

From the SW1E postcode district outwards, we take on FD60 fire doors across City of Westminster for homes, blocks and workplaces.

Around City of Westminster, student accommodation, clinics and schools all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Before ordering FD60 doors for a City of Westminster building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in City of Westminster we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

As standard, the work covers:

• Intumescent and smoke seals as specified
• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence
• Frame fixing and structural gap sealing recorded with photos

Rules and responsibilities in City of Westminster

The rules that apply to fire doors in City of Westminster are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a City of Westminster block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in City of Westminster?

Typical settings for FD60 fire doors include plant and boiler rooms, mixed-use commercial buildings and stair cores in taller blocks. In City of Westminster, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in City of Westminster

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in City of Westminster?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your City of Westminster building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

City of Westminster and neighbouring towns

Neighbouring towns such as Pimlico, London, Chelsea and Battersea are covered too, so clients with several buildings can use one installer and one evidence format.

Questions