FD60 fire doors in Pimlico

FD60 fire doors in Pimlico: what's involved

Looking for FD60 fire doors in Pimlico? We supply and fit certified fire doors and components across Pimlico and the wider Greater London area, working from a free survey and a fixed written quote.

Around Pimlico, schools, care homes and student accommodation all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

For FD60 work in Pimlico we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Pimlico buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Frame fixing and structural gap sealing recorded with photos

The regulations behind fire doors in Pimlico

The rules that apply to fire doors in Pimlico are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a Pimlico block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in Pimlico?

From mixed-use commercial buildings to plant and boiler rooms, the requirement for FD60 fire doors in Pimlico comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a Pimlico installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Pimlico?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Pimlico building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Pimlico and nearby

We also cover towns near Pimlico, including City of Westminster (1.0 km away), Battersea and Chelsea. If your building is in SW1V or a neighbouring district, the service and pricing are the same.

Common questions