FD60 fire doors in Morden: what's involved
Our FD60 fire doors service covers Morden and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
In and around Morden, fire door work covers everything from care homes to purpose-built blocks of flats. We plan each job around the people who use the building.
For FD60 work in Morden we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Morden buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
As standard, the work covers:
- 60-minute glazing systems where vision panels are needed
- Check of the fire strategy rating for each opening
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
What the rules say for Morden
In Morden, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. In London, the London Fire Brigade is the enforcing authority for fire safety law.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Morden building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where FD60 fire doors fit in Morden
The need for FD60 fire doors usually arises in refuse stores or mixed-use commercial buildings, and sometimes stair cores in taller blocks. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Morden to keep escape routes protected throughout.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Morden
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Morden and nearby
Nearby towns we cover include Mitcham, Wimbledon and Carshalton. Distance from Morden does not change our guide prices, and the survey and quote are free.
Questions
Is Morden within your coverage area?
It is. We cover Morden in Greater London and neighbouring towns such as Mitcham. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.

