FD60 fire doors in Canary Wharf

Getting FD60 fire doors right in Canary Wharf

We provide FD60 fire doors in Canary Wharf (E14 and the surrounding postcodes), from the first survey through to a documented handover.

Fire doors in Canary Wharf protect escape routes in schools, purpose-built blocks of flats and clinics alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Before ordering FD60 doors for a Canary Wharf building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Canary Wharf we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Intumescent and smoke seals as specified
• Frame fixing and structural gap sealing recorded with photos
• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence

What the rules say for Canary Wharf

In Canary Wharf, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. Enforcement of fire safety law in Canary Wharf sits with the London Fire Brigade.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Canary Wharf building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Which buildings in Canary Wharf need FD60 fire doors?

From mixed-use commercial buildings to stair cores in taller blocks, the requirement for FD60 fire doors in Canary Wharf comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Canary Wharf

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Canary Wharf?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Canary Wharf and nearby

Nearby towns we cover include Bow, Canning Town and Greenwich. Distance from Canary Wharf does not change our guide prices, and the survey and quote are free.

Common questions