FD30 fire doors in Wakefield, done to the evidence
If you need FD30 fire doors in Wakefield, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Wakefield, fire door work covers everything from care homes to HMOs. We plan each job around the people who use the building.
In Wakefield, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Wakefield, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
As standard, the work covers:
- Certified FD30 or FD30S leaf, or full doorset
- Survey of the opening, frame and existing ironmongery
- Frame-to-wall gap sealed with an evidenced material
- Overhead closer set to close and latch
Rules and responsibilities in Wakefield
In Wakefield, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Wakefield building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where FD30 fire doors fit in Wakefield
The need for FD30 fire doors usually arises in offices or care homes, and sometimes shops. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Wakefield to keep escape routes protected throughout.
The steps on a Wakefield installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Wakefield
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Wakefield as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Wakefield
Wakefield is about 13.0 km from Leeds, and we cover both, along with nearby Lofthouse and Ossett. Send us your postcode and we'll confirm survey dates.
Questions from Wakefield
Is Wakefield within your coverage area?
It is. We cover Wakefield in West Yorkshire and neighbouring towns such as Lofthouse. There is no charge for the survey.
What happens on a survey in Wakefield?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.