FD30 fire doors in Shipley

FD30 fire doors in Shipley: what's involved

Looking for FD30 fire doors in Shipley? We supply and fit certified fire doors and components across Shipley and the wider West Yorkshire area, working from a free survey and a fixed written quote.

Around Shipley, care homes, family homes after loft conversions and light industrial buildings all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

For a mixed portfolio in Shipley, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Shipley is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

What you get:

• Certified FD30 or FD30S leaf, or full doorset
• Fire-tested hinges, latch or lock and intumescent pads
• Intumescent strips and smoke seals to the certification
• Survey of the opening, frame and existing ironmongery

Fire door law for Shipley properties

In Shipley, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Shipley building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Which buildings in Shipley need FD30 fire doors?

Typical settings for FD30 fire doors include schools, care homes and shops. In Shipley, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Shipley

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Shipley building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Shipley and neighbouring towns

Nearby towns we cover include Bradford, Guiseley and Yeadon. Distance from Shipley does not change our guide prices, and the survey and quote are free.

Common questions