FD30 fire doors: our service in Castleford
Looking for FD30 fire doors in Castleford? We supply and fit certified fire doors and components across Castleford and the wider West Yorkshire area, working from a free survey and a fixed written quote.
Fire doors in Castleford protect escape routes in family homes after loft conversions, small blocks of flats and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For a mixed portfolio in Castleford, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Castleford is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Intumescent strips and smoke seals to the certification
- Certified FD30 or FD30S leaf, or full doorset
- Photo record, product data and certificate references at handover
- Frame-to-wall gap sealed with an evidenced material
Fire door law for Castleford properties
In Castleford, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Castleford building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs FD30 fire doors in Castleford?
Typical settings for FD30 fire doors include shops, blocks of flats and care homes. In Castleford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Castleford?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Castleford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Castleford and nearby
Castleford is about 14.5 km from Leeds, and we cover both, along with nearby Pontefract and Lofthouse. Send us your postcode and we'll confirm survey dates.
Common questions
Is Castleford within your coverage area?
It is. We cover Castleford in West Yorkshire and neighbouring towns such as Pontefract. There is no charge for the survey.
What happens on a survey in Castleford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.