FD30 fire doors in Keighley

What FD30 fire doors in Keighley should include

Our FD30 fire doors service in Keighley is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Keighley range from industrial estates to houses with integral garages and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In Keighley, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Keighley, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

On a typical job that means:

• Overhead closer set to close and latch
• Survey of the opening, frame and existing ironmongery
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

The regulations behind fire doors in Keighley

Fire doors in Keighley fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Keighley above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where FD30 fire doors fit in Keighley

From shops to schools, the requirement for FD30 fire doors in Keighley comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a Keighley installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Keighley

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Keighley building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Keighley

Nearby towns we cover include Shipley, Guiseley and Bradford. Distance from Keighley does not change our guide prices, and the survey and quote are free.

Common questions