Riser and cupboard fire doors: our service in Wakefield
We provide riser and cupboard fire doors in Wakefield (WF1 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Wakefield, fire door work covers everything from converted period houses to care homes. We plan each job around the people who use the building.
Riser and meter cupboard doors in Wakefield blocks are easy to overlook until an inspection flags them. We match riser doors in Wakefield to the rating of the riser enclosure, not to whatever was there before.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
Each installation includes:
- Seals and frame gap sealing
- Record of any fire stopping concerns found
- Signage as required
- Fire-rated riser and cupboard doorsets
The regulations behind fire doors in Wakefield
The rules that apply to fire doors in Wakefield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wakefield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where riser and cupboard fire doors fit in Wakefield
Typical settings for riser and cupboard fire doors include hotels, blocks of flats and office buildings. In Wakefield, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Wakefield installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Wakefield
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one Wakefield building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Wakefield and nearby
We also cover towns near Wakefield, including Lofthouse (5.1 km away), Ossett and Dewsbury. If your building is in WF1 or a neighbouring district, the service and pricing are the same.
Common questions
Is Wakefield within your coverage area?
It is. We cover Wakefield in West Yorkshire and neighbouring towns such as Lofthouse. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.