Fire door ironmongery in Walsall, done to the evidence
We provide fire door ironmongery in Walsall (WS1 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Walsall protect escape routes in care homes, converted period houses and offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Walsall we replace them with hardware covered by each door's evidence. We supply ironmongery for Walsall fire doors that matches each door's test evidence.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
On a typical job that means:
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
- Fire door signage
- Bolts and selectors where specified
The regulations behind fire doors in Walsall
Fire doors in Walsall fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Walsall above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door ironmongery in Walsall?
The need for fire door ironmongery usually arises in offices or HMOs, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Walsall to keep escape routes protected throughout.
The steps on a Walsall installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Walsall?
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Walsall building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Walsall
Walsall is about 12.9 km from Birmingham, and we cover both, along with nearby Bloxwich and Wednesbury. Send us your postcode and we'll confirm survey dates.
Common questions
Is Walsall within your coverage area?
It is. We cover Walsall in West Midlands and neighbouring towns such as Bloxwich. There is no charge for the survey.
What happens on a survey in Walsall?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.