FD30 fire doors in Cannock, done to the evidence
From the WS11 postcode district outwards, we take on FD30 fire doors across Cannock for homes, blocks and workplaces.
Buildings in and around Cannock range from houses with integral garages to family homes after loft conversions and HMOs. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Each FD30 leaf we supply for Cannock is sized for the opening, rather than trimmed beyond what its certification allows. In Cannock, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What you get:
- Frame-to-wall gap sealed with an evidenced material
- Certified FD30 or FD30S leaf, or full doorset
- Photo record, product data and certificate references at handover
- Intumescent strips and smoke seals to the certification
Rules and responsibilities in Cannock
Fire doors in Cannock fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Cannock above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs FD30 fire doors in Cannock?
The need for FD30 fire doors usually arises in blocks of flats or HMOs, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Cannock to keep escape routes protected throughout.
From enquiry to handover in Cannock
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Cannock
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Cannock building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Cannock
Nearby towns we cover include Burntwood, Bloxwich and Rugeley. Distance from Cannock does not change our guide prices, and the survey and quote are free.
Common questions
Is Cannock within your coverage area?
It is. We cover Cannock in Staffordshire and neighbouring towns such as Burntwood. There is no charge for the survey.
Can you work from an existing inspection report for my Cannock building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.