Getting steel fire doors right in Cannock
If you need steel fire doors in Cannock, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Cannock, schools, HMOs and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Plant rooms, bin stores and warehouses in and around Cannock often call for steel doorsets that can take knocks and damp. For steel fire doors in Cannock we order factory-prepared doorsets so the hardware matches the test evidence exactly.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
What you get:
- Factory-prepared hinges and hardware
- Single and double steel doorsets
- Locks, closers and panic hardware as specified
- Powder-coated finishes
What the rules say for Cannock
Fire doors in Cannock fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Cannock above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Cannock
The need for steel fire doors usually arises in workshops or bin stores, and sometimes plant rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Cannock to keep escape routes protected throughout.
From enquiry to handover in Cannock
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
What does steel fire doors cost in Cannock?
As a guide, budget £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. The figure for your Cannock building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Cannock
Cannock is about 36.4 km from Stoke-on-Trent, and we cover both, along with nearby Burntwood and Bloxwich. Send us your postcode and we'll confirm survey dates.
Common questions
Do you cover WS11 and nearby postcodes?
Yes. We cover Cannock including WS11, and nearby towns such as Burntwood and Bloxwich. The survey and written quote are free.
What happens on a survey in Cannock?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can steel fire doors be painted?
They are usually supplied powder coated. Repainting on site is possible but must avoid covering seals and labels, and should follow the manufacturer's guidance.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.