FD30 fire doors in Stafford, ST16

FD30 fire doors for Stafford buildings

When you book FD30 fire doors in Stafford, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Around Stafford, houses with integral garages, high-street shops and industrial estates all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

In Stafford, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Stafford is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

As standard, the work covers:

• Frame-to-wall gap sealed with an evidenced material
• Certified FD30 or FD30S leaf, or full doorset
• Intumescent strips and smoke seals to the certification
• Survey of the opening, frame and existing ironmongery

Rules and responsibilities in Stafford

England's framework applies in Stafford. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Stafford, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Who needs FD30 fire doors in Stafford?

You are most likely to need FD30 fire doors if you look after offices, care homes or HMOs. Whatever the building in Stafford, we survey each opening and tell you which doors need work and which do not.

The steps on a Stafford installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Stafford

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Stafford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Nearby areas we cover from Stafford

We also cover towns near Stafford, including Rugeley (13.1 km away), Cannock and Burntwood. If your building is in ST16 or a neighbouring district, the service and pricing are the same.

Questions