FD30 fire doors in Stoke-on-Trent: what's involved
If you need FD30 fire doors in Stoke-on-Trent, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Stoke-on-Trent protect escape routes in purpose-built blocks of flats, mixed-use office buildings and clinics alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For a mixed portfolio in Stoke-on-Trent, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Stoke-on-Trent is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Certified FD30 or FD30S leaf, or full doorset
- Frame-to-wall gap sealed with an evidenced material
- Fire-tested hinges, latch or lock and intumescent pads
- Intumescent strips and smoke seals to the certification
Rules and responsibilities in Stoke-on-Trent
The rules that apply to fire doors in Stoke-on-Trent are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Stoke-on-Trent block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD30 fire doors fit in Stoke-on-Trent
From HMOs to care homes, the requirement for FD30 fire doors in Stoke-on-Trent comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Stoke-on-Trent
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Stoke-on-Trent
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Stoke-on-Trent
Beyond Stoke-on-Trent itself we also cover nearby towns such as Newcastle-under-Lyme (3.2 km), Longton and Kidsgrove. The service, pricing and evidence are the same wherever you are.
Questions from Stoke-on-Trent
Is Stoke-on-Trent within your coverage area?
It is. We cover Stoke-on-Trent in Staffordshire and neighbouring towns such as Newcastle-under-Lyme. There is no charge for the survey.
Can you work from an existing inspection report for my Stoke-on-Trent building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.