What FD30 fire doors in Shepherds Bush should include
We provide FD30 fire doors in Shepherds Bush (W12 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Shepherds Bush, fire door work covers everything from purpose-built blocks of flats to clinics. We plan each job around the people who use the building.
Each FD30 leaf we supply for Shepherds Bush is sized for the opening, rather than trimmed beyond what its certification allows. In Shepherds Bush, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Intumescent strips and smoke seals to the certification
- Fire-tested hinges, latch or lock and intumescent pads
- Photo record, product data and certificate references at handover
- Survey of the opening, frame and existing ironmongery
The regulations behind fire doors in Shepherds Bush
Fire doors in Shepherds Bush fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. Enforcement of fire safety law in Shepherds Bush sits with the London Fire Brigade.
For residential buildings in Shepherds Bush above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs FD30 fire doors in Shepherds Bush?
You are most likely to need FD30 fire doors if you look after shops, offices or care homes. Whatever the building in Shepherds Bush, we survey each opening and tell you which doors need work and which do not.
How a Shepherds Bush job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Shepherds Bush
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Shepherds Bush as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Shepherds Bush
Neighbouring towns such as Notting Hill, Chiswick, Fulham and Willesden are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Shepherds Bush within your coverage area?
It is. We cover Shepherds Bush in Greater London and neighbouring towns such as Notting Hill. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.

