Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD30 fire doors in Chiswick

The everyday 30-minute fire door, supplied as a leaf or full doorset and fitted to its evidence. Free survey in Chiswick and door-by-door pricing.

Quote in Chiswick

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

FD30 fire doors for Chiswick buildings

When you book FD30 fire doors in Chiswick, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Fire doors in Chiswick protect escape routes in shared houses, clinics and hotels alike. We adapt the programme to the building and its occupants, never the standard of the installation.

In Chiswick, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Chiswick, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

  • Overhead closer set to close and latch
  • Fire-tested hinges, latch or lock and intumescent pads
  • Certified FD30 or FD30S leaf, or full doorset
  • Frame-to-wall gap sealed with an evidenced material

What the rules say for Chiswick

The rules that apply to fire doors in Chiswick are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Chiswick sits with the London Fire Brigade.

Where a Chiswick block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD30 fire doors in Chiswick?

You are most likely to need FD30 fire doors if you look after HMOs, shops or offices. Whatever the building in Chiswick, we survey each opening and tell you which doors need work and which do not.

Our process in Chiswick

  1. Measure the opening, check the frame and confirm the rating needed
  2. Order a certified leaf or doorset to size, with matching components
  3. Remove the old door and assess the frame or structural opening
  4. Fix the frame and hang the leaf to the certified gap tolerances
  5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
  6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Chiswick

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Chiswick and nearby

Neighbouring towns such as Acton, Barnes, Shepherds Bush and Notting Hill are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Chiswick

Is Chiswick within your coverage area?

It is. We cover Chiswick in Greater London and neighbouring towns such as Acton. There is no charge for the survey.

How quickly can you survey in Chiswick?

It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.

What is the difference between FD30 and FD30S?

FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

How long does it take to fit an FD30 door?

A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

Book a free survey in Chiswick

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote