FD30 fire doors in Brixton, SW9

FD30 fire doors for Brixton buildings

If you need FD30 fire doors in Brixton, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Brixton, fire door work covers everything from student accommodation to restaurants. We plan each job around the people who use the building.

For a mixed portfolio in Brixton, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Brixton is sized for the opening, rather than trimmed beyond what its certification allows.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

As standard, the work covers:

• Intumescent strips and smoke seals to the certification
• Survey of the opening, frame and existing ironmongery
• Photo record, product data and certificate references at handover
• Overhead closer set to close and latch

Fire door law for Brixton properties

England's framework applies in Brixton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.

For blocks over 11 metres in Brixton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Brixton need FD30 fire doors?

Landlords, managing agents, facilities teams and homeowners in Brixton can all commission FD30 fire doors from us. The usual settings are care homes and offices, though single doors for blocks of flats are just as welcome.

The steps on a Brixton installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Brixton

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Brixton building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Brixton and nearby

We also cover towns near Brixton, including Peckham (2.7 km away), Pimlico and Battersea. If your building is in SW9 or a neighbouring district, the service and pricing are the same.

Common questions