FD30 fire doors in Heston, done to the evidence
When you book FD30 fire doors in Heston, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Heston, converted flats, mixed-use office buildings and hotels all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For a mixed portfolio in Heston, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Heston is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Overhead closer set to close and latch
- Photo record, product data and certificate references at handover
- Fire-tested hinges, latch or lock and intumescent pads
- Certified FD30 or FD30S leaf, or full doorset
Rules and responsibilities in Heston
Fire doors in Heston fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. Enforcement of fire safety law in Heston sits with the London Fire Brigade.
For residential buildings in Heston above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where FD30 fire doors fit in Heston
You are most likely to need FD30 fire doors if you look after HMOs, offices or shops. Whatever the building in Heston, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Heston
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Heston
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Heston building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Heston
We also cover towns near Heston, including Hounslow (2.0 km away), Isleworth and Southall. If your building is in TW5 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Heston?
Yes, we take on FD30 fire doors in Heston and the surrounding area, including Hounslow and Isleworth. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Heston?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

