FD30 fire doors for Uxbridge buildings
Our FD30 fire doors service in Uxbridge is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Uxbridge, student accommodation, shared houses and restaurants all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In Uxbridge, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Uxbridge, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
Each installation includes:
- Survey of the opening, frame and existing ironmongery
- Certified FD30 or FD30S leaf, or full doorset
- Overhead closer set to close and latch
- Frame-to-wall gap sealed with an evidenced material
The regulations behind fire doors in Uxbridge
England's framework applies in Uxbridge. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. Enforcement of fire safety law in Uxbridge sits with the London Fire Brigade.
For blocks over 11 metres in Uxbridge, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Uxbridge
The need for FD30 fire doors usually arises in care homes or schools, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Uxbridge to keep escape routes protected throughout.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Uxbridge?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Uxbridge building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Uxbridge and nearby
We also cover towns near Uxbridge, including Ruislip (4.9 km away), Hayes and Gerrards Cross. If your building is in UB8 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Uxbridge?
Yes, we take on FD30 fire doors in Uxbridge and the surrounding area, including Ruislip and Hayes. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.

