FD30 fire doors: our service in Walthamstow
Looking for FD30 fire doors in Walthamstow? We supply and fit certified fire doors and components across Walthamstow and the wider Greater London area, working from a free survey and a fixed written quote.
Around Walthamstow, student accommodation, clinics and converted flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For a mixed portfolio in Walthamstow, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Walthamstow is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
On a typical job that means:
- Overhead closer set to close and latch
- Intumescent strips and smoke seals to the certification
- Photo record, product data and certificate references at handover
- Survey of the opening, frame and existing ironmongery
Which fire door rules apply in Walthamstow?
The rules that apply to fire doors in Walthamstow are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.
Where a Walthamstow block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Walthamstow need FD30 fire doors?
Landlords, managing agents, facilities teams and homeowners in Walthamstow can all commission FD30 fire doors from us. The usual settings are blocks of flats and HMOs, though single doors for offices are just as welcome.
The steps on a Walthamstow installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Walthamstow
As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Walthamstow building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Walthamstow
Neighbouring towns such as Leytonstone, Tottenham, Woodford Green and Stamford Hill are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Walthamstow
Do you cover E17 and nearby postcodes?
Yes. We cover Walthamstow including E17, and nearby towns such as Leytonstone and Tottenham. The survey and written quote are free.
What happens on a survey in Walthamstow?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

