Fire door frames: our service in Garston
We provide fire door frames in Garston (L19 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Garston, fire door work covers everything from care homes to small blocks of flats. We plan each job around the people who use the building.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Garston survey. Frame-to-wall gaps on Garston jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Hardwood or certified frames to suit the door
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
- Fixing at specified centres with packing
What the rules say for Garston
Fire doors in Garston fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Garston above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door frames in Garston?
The need for fire door frames usually arises in older blocks of flats or offices, and sometimes converted houses. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Garston to keep escape routes protected throughout.
The steps on a Garston installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Garston
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Garston
Nearby towns we cover include Speke, Halewood and Ellesmere Port. Distance from Garston does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover L19 and nearby postcodes?
Yes. We cover Garston including L19, and nearby towns such as Speke and Halewood. The survey and written quote are free.
Can you work from an existing inspection report for my Garston building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.