What fire door frames in Kirkby should include
Our fire door frames service covers Kirkby and the wider Merseyside area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Kirkby range from light industrial buildings to small offices and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Kirkby survey. We photograph every frame we fix in Kirkby before the architraves go on, so the hidden work is on record.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
- Assessment of frame condition and compatibility
The regulations behind fire doors in Kirkby
In Kirkby, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Kirkby building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs fire door frames in Kirkby?
Landlords, managing agents, facilities teams and homeowners in Kirkby can all commission fire door frames from us. The usual settings are schools and converted houses, though single doors for older blocks of flats are just as welcome.
The steps on a Kirkby installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Kirkby
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Kirkby building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Kirkby
Nearby towns we cover include Maghull, Litherland and Prescot. Distance from Kirkby does not change our guide prices, and the survey and quote are free.
Questions from Kirkby
Is Kirkby within your coverage area?
It is. We cover Kirkby in Merseyside and neighbouring towns such as Maghull. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.