What fire door frames in Bootle should include
If you need fire door frames in Bootle, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Bootle, fire door work covers everything from schools to HMOs. We plan each job around the people who use the building.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Bootle survey. Frame-to-wall gaps on Bootle jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
As standard, the work covers:
- Architraves and making good
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
Fire door law for Bootle properties
The rules that apply to fire doors in Bootle are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Bootle block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door frames in Bootle?
You are most likely to need fire door frames if you look after offices, older blocks of flats or converted houses. Whatever the building in Bootle, we survey each opening and tell you which doors need work and which do not.
Our process in Bootle
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Bootle
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Bootle
We also cover towns near Bootle, including Litherland (1.3 km away), Wallasey and Liverpool. If your building is in L21 or a neighbouring district, the service and pricing are the same.
Questions from Bootle
Do you cover L21 and nearby postcodes?
Yes. We cover Bootle including L21, and nearby towns such as Litherland and Wallasey. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.