Fire door frames in Birkenhead: what's involved
If you need fire door frames in Birkenhead, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Birkenhead range from shared houses to purpose-built blocks of flats and converted flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Birkenhead survey. Frame-to-wall gaps on Birkenhead jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
What you get:
- Architraves and making good
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
- Assessment of frame condition and compatibility
Fire door law for Birkenhead properties
England's framework applies in Birkenhead. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Birkenhead, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where fire door frames fit in Birkenhead
Landlords, managing agents, facilities teams and homeowners in Birkenhead can all commission fire door frames from us. The usual settings are schools and offices, though single doors for converted houses are just as welcome.
Our process in Birkenhead
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Birkenhead?
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Birkenhead building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Birkenhead and neighbouring towns
Nearby towns we cover include Liverpool, Wallasey and Bebington. Distance from Birkenhead does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover CH41 and nearby postcodes?
Yes. We cover Birkenhead including CH41, and nearby towns such as Liverpool and Wallasey. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.